–1, Select the appropriate voltage and connector for charging electronic equipment / supply.
–2, Allow the device to connect with EPOWER, press the switch, the power supply immediately; unplug the cable, automatic sleep within a minute.
–3, EPOWER to charge, five lights flashing cycle , five full bright end of charge.
–4, With power display function as an external device charging / power indicator lamp display, showing a built-in battery is 20%, showing two, power is 40%, and so on. When the power is low, five shiny.
–5, To use LED lighting function, press the key to open five seconds to start lighting function, after a short press on the key switch lighting condition. As follows: light, strobe, SOS, close.
–6, Place the product in a cool dry place, away from direct sunlight.
Product Special note:
When the car starts to 12V, make sure the positive ( + ) and black clamp clamping battery power indicator negative EPOWER in three or more, the red battery clip clamp ( – ) pole; then the battery cable connector into EPOWER, automobile ignition switch to start (START) position. After the car starts, immediately pull the plug, then remove the battery clip clip.
–Patented technology, like the smallest and lightest;
–16800mAh high capacity using high-power polymer batteries, to support fast charging, low self-discharge, charge and discharge cycles up to 1000 times;
–Support 12V car emergency start, the brand mobile phones, PSP, MP3/MP4 handheld PDA, laptop and other products charge / power supply , along with lighting function;
–Multiple safety protection design to ensure zero defect products.